1.Power On
Reinsert the battery until you hear the startup sound.
- No sound? Fully charge the saber and try again.
2.Charge the Saber
Charge until the blue light turns off (indicating full charge).
- Use only a 5V 1A adapter
- Charging time: 3–4 hours maximum
- Do not charge overnight
3.Install the Blade
Ensure the blade is properly seated and making good contact with the hilt.
- Always install the blade while the saber is powered off
4.Troubleshooting
If there is no sound or light, update the configuration files.
Important Notes
- Polarity: Align the + / – symbols correctly to avoid damage
- Blade Use: Do not twist the blade during installation
- Core Installation: Do not twist the core when inserting it
- Hilt Handling: Do not unscrew the hilt from the middle section
For more help, visit our Help Center for additional tutorials.
