SN V4 NEOPIXEL PRO TUTORIAL
SN V4 NEOPIXEL PRO TUTORIAL
Before reading this guide, make sure your lightsaber is a single-button or dual-button version. Note that lightsabers generally have three states, off, standby, and active.
Standby mode is while your saber is on (accepting inputs) but the blade is not active.
Active mode is when your saber blade is lit (the LED is active) and making sound (if enabled)
I. SNV4 Pro Lightsaber Operation Manual
1. One Button Operations
Charging: Insert the charging cable, and the power level alarm will sound. The breathing light will illuminate.
1.1 When the blade is in the power-off state
1.1.1 Switch between 82 and 92 blade types
Press the button three times in quick succession.
1.1.2 Wake up the blade
Long press the button.
1.2 While blade is in standby mode
1.2.1 Enter power-on mode
Short press the button after entering standby mode.
1.2.2 Enter power-off mode
① Long press the button until the breathing light stops flashing.
② Automatic power-off if no operation within 10 minutes.
1.2.3 Switch the volume
Press and hold the button until the breathing light blinks once, then release.
1.2.4 Switch power-on effects
Press and hold the button until the breathing light blinks twice, then release.
1.2.5 Switch regular lighting effects
Press and hold the button until the breathing light blinks three times, then release.
1.2.6 Switch sound effects
Press and hold the button until the breathing light blinks four times, then release.
1.3 While blade is active
1.3.1 Enter standby mode
Press and hold the button until the breathing light blinks four times to enter standby mode.
1.3.2 Enter power-off mode
Press and hold the button until the breathing light stops flashing.
1.3.3 Shockwave
Quickly tap the button.
1.3.4 LOCK-UP
Press and hold the button until the breathing light blinks once, then release.
1.3.5 Switch colors
Press and hold the button until the breathing light blinks twice, then release.
1.3.6 Toggle FOC on/off
Press and hold the button until the breathing light blinks three times, then release.
1.4 Gesture operations in standby mode
1.4.1 Reverse to switch sound effects
Hold the button, tilt the blade upwards, and then rotate.
1.4.2 Enable or disable BGM
Hold the button, tilt the blade downwards, and then rotate.
1.5 Gesture operations in active mode
1.5.1 Force
Hold the button, tilt the blade upwards, and then rotate.
1.5.2 Switch colors
Hold the button, tilt the blade downwards, and then rotate.
1.5.3 Drag
Hold the button and tap the blade.
1.5.4 Melt
Hold the button and thrust forwards horizontally.
1.5.5 Stab
Release the button and thrust forwards.
2. Two Button Operations
PWR button: Main button, power button.
AUX button: Auxiliary button, function button.
(When buttons are arranged vertically: upper button is the main button, lower button is the AUX button; when buttons are arranged horizontally: left button is the main button, right button is the AUX button)
Charging: Insert the charging cable, and the charging sound effect will play while the breathing light blinks.
2.1 When the blade is in the power-off state
2.1.1 Switch between 82/92 blade types
Quickly press the main button three times.
2.1.2 Enter standby mode
Long press the main button to hear the power-on sound effect and enter standby mode.
2.2 While blade is in standby mode
2.2.1 Enter power-on mode
Short press the main button to enter power-on mode.
2.2.2 Enter power-off mode
Quickly press the AUX button three times to hear the power-off sound effect and enter power-off mode.
2.2.3 Switch sound effects
Short press the AUX button once and then release.
2.2.4 Switch power-on startup effects
Long press the main button to hear the corresponding sound indicating a successful switch.
2.2.5 Switch power-on default lighting effects
Long press the AUX button to hear the corresponding sound indicating a successful switch.
2.2.6 Adjust volume
Simultaneously press and hold the main and AUX buttons to enter volume setting mode. Short press the main button to increase the volume; short press the AUX button to decrease the volume. Press both buttons simultaneously again to hear the sound indicating the exit from volume setting mode.
2.3 While blade is active
2.3.1 Enter power-off mode
Short press the main button to enter power-off mode.
2.3.2 Shockwave
Short press the AUX button.
2.3.3 LOCKUP
Long press the AUX button for one second, then release to enter LOCKUP mode. Short press the AUX button again to exit LOCKUP mode.
2.3.4 Toggle FOC on/off
Simultaneously press the main and AUX buttons in power-on mode to toggle FOC mode on or off.
2.4 Gesture operations in standby mode
2.4.1 Reverse to switch sound effects
Hold the main button, tilt the blade upwards, and then rotate.
2.4.2 Enable or disable BGM
Hold the main button, tilt the blade downwards, and then rotate.
2.5 Gesture control in active mode
2.5.1 Force
Hold the main button, tilt the blade upwards, and then rotate.
2.5.2 Switch colors
Hold the main button, tilt the blade downwards, and then rotate.
2.5.3 Drag
Hold the main button and tap the blade.
2.5.4 Melt
Hold the main button and thrust forwards horizontally.
2.5.5 Stab
Release the main button and thrust forwards.